"This is what the specs say at on the site:
Width of the neck at the nut: 1 3/4"; at the 20st fret: 2 9/16 " String spacing at the nut is 3/8" and 5/8" at the 20th fret
Don't know if that means anything.
Once again Tim... you bring your wealth of wisdom to the board. It's cool how you let your Instruments speak for themselves, and are secure enough to recommend lesser instruments...
I wanna be like you when I grow up. "
I just did a check on these dimensions, and 18mm ctc would be super tight to the edge of the board. I'd probably max it out at 17mm if I had to swap out a pre-cut bridge. Mind you, that's just a cad drawing so a real-life switch out might be a bit different.
I recommend the cheaper stuff because they work. Not everyone can afford the type of stuff I make, and I don't think anyone should have to feel bad because the play a game in keds!